E-Line DL/SL group Busbar Trunking Systems are used in lighting circuits that require 25 A and 32A single phase or three-phase electrical current in buildings and industrial facilities. 10A/16A tap-off plugs (with and without cartridge fuses) are designed to supply lighting circuits according to their attributes.
Busbar is typically used in power stations and industrial applications for lower and medium-capacity generator connections. MV Busbar can also be used for interconnections between switchgear panels and for switchgear to transformer connections.
Busbar is a new series of bus duct systems developed by LINKK Busway Systems (M) Sdn Bhd. It is designed for commercial and industrial electrical distributions. These systems are tested and certified by KEMA, ASTA, and UL.
is lightweight, low impedance, non-ventilated, naturally cooled and totally enclosed within the steel or aluminium housing for protection against mechanical damage and dust accumulation. It consists of copper bars with purity >99.95%, of aluminium bars with conductivity >61%.
The advantages of using epoxy coating as insulations are:
Busbars that comply with standard IEC 61439-6 with nominal currents of 25A and 40A. Available with 2, 4, 6, 8, or 12 conductors in the single or double casing.
3 Phase Dry Type Cast Resin Isolation Transformer Has Low-Temperature Rise, Long Service Life AndLow Energy Consumption Due To The Advanced And Unique Design. ZTelec Group Provided Reliable Power Supply Equipment For Shenzhou IX And X
This series of dry-type transformers directly reduces 35KV grid power to 400V for users, eliminating the need for a 10KV step, reducing costs, enhancing durability against over-voltage, and minimizing partial discharge.
Insulation Class: F Class
Frequency(Hz): 50
Tap Range: 50-160KVA: ±2.5%, ±5%; 200-2500KVA: ±5%, ±2*2.5%
Executive Standard: IEC60076 & National Standard
Three Phase Dry Type Step Down/Up Transformer Is Featured a fine Structure, Low Noise, Small Loss And Stable Performance, Etc., And It Is Sold Well In Power Grid, Steel, Chemical Industry And Other Departments. Amorphous alloy transformers, with their disordered metal atoms, offer high energy efficiency and reduced losses compared to silicon steel cores. Their smaller hysteresis loop and up to 70% lower core losses result in less heat generation, lower temperature rise, and stable operation, making them ideal for energy-efficient transformers.
KYN28-24(Z) series armored moveable AC metal switchgear (hereinafter referred to as “switchgear”) is a complete power distribution device for a 20kV three-phase AC 50(60) Hz single bus and single bus section system. It is mainly used in power plants, power transmission of small and medium-sized generators, power distribution of industrial and mining enterprises, and power receiving and transmission of secondary substations in electrical systems, as well as starting of large high voltage motors, etc. to implement control protection and monitoring.
The XGN D-12 series is a compact, Vacuum-insulated ring network switchgear with advanced technology, comprising load switches, vacuum circuit breakers, and more. It offers excellent electrical and mechanical performance, with minimal environmental impact and easy maintenance, making it suitable for diverse wiring systems.
GCK LV withdrawable switchgear is applicable to the low voltage distribution system with AC 50Hz, rated working voltage of 380V. It contains power center (PC) and motor control center (MCC) functions. Each technical parameter meets national standards. With characteristics of advanced structure, attractive appearance, high electric performance, high protection level, reliability and safety, and low maintenance, it is the ideal distribution device for low voltage power supply systems in metallurgy, petroleum, chemical, power, machinery, and light weaving industries, etc.
The product accords with standards IEC-439, GB7251.1.
More than 120 years developing HVAC technologies have made us a recognized leader in the market.
We offer superior quality, durability and a wide product line that delivers efficient comfort solutions
As experts, it’s part of our mission to develop our HVAC technician’s skills to serve better and more efficiently, while educating our customers to choose the right comfort solution.
Building long-term relationships with our distributors has been an integral part of our success. We work closely with them to ensure delivering the best service possible in each market
Our team is effective and approachable. We listen carefully to our customer needs and actively work to provide solutions. We make our customers feel comfortable working with us
Split systems are indoor and outdoor units that offer precise temperature control. They come with remote control, air purification options, and a choice of fixed or variable compressors for energy efficiency. The indoor unit can be wall or ceiling-mounted, making them versatile for different room setups.
MIDEA introduces the innovative DC multi-split ATOM system, a superior option for both residential and commercial spaces in Ukraine, offering significant advantages over traditional multi-split and multi-zone systems.
Multi-split systems consist of one outdoor unit and multiple indoor units (2-5) connected in parallel, allowing individual climate control in various areas without cluttering the exterior. Ideal for small houses or large apartments with indoor units situated within 9-15 meters of the outdoor unit or a total pipe length not exceeding 45 meters.
Compressor-condensing units (CCU) are integral components in central air conditioning systems, serving as the outdoor unit, especially useful when installing the unit on rooftops is impractical due to load constraints or space limitations.
Multi-zone air conditioning systems use Freon to independently control temperature in numerous rooms, and innovative systems like Wire Line Triple Tube can enable mixed heating and cooling modes in different indoor units.
VRF system outdoor units, comprising compressors, fans, evaporators, valve systems, and advanced electronic controls, come in various configurations based on compressor type, airflow direction, and cooling method, tailored for different applications.
Multizone system indoor units offer a wide range of options, rivaling domestic and semi-industrial series, and seamlessly integrate into the interior while effectively addressing diverse air treatment needs in various room and building types.
VRF systems offer a variety of wired controllers, categorized into indoor unit control (individual and group), outdoor unit monitoring, and specialized controllers, with the potential to create advanced systems connecting to servers, BMS, and the internet.
Rooftop units are robust HVAC systems designed for cooling, heating, and ventilation in large commercial spaces, eliminating the need for freon pipes and conveniently mounted on rooftops or near walls.
The Duct AC series is tailored for controlling temperature in vast areas like supermarkets, warehouses, and transportation hubs, using large ducts and various air-supply units, with indoor installations in ceiling, false ceilings, or technical areas, and the option for 2- or 4 pipe freon circuit connections.
Midea’s air-cooled chillers, 30-350 kW, are popular for liquid-based air conditioning, featuring Scroll compressors and heating capabilities. In the 360-1500 kW range, modular chiller assemblies and high-capacity screw compressor-based units are offered, with optional features like control panels and central monitoring programs.
Air-cooled chillers are designed to meet the high demands of the countries of Central Europe, America and Southeast Asia on technical and operational characteristics.
Hydronic fan-coils are central air conditioning devices using liquid coolant to cool or heat indoor air through a heat exchanger, comprising a fan, motor, and control system.
Chillers are employed in large industrial and administrative spaces, as well as data centers, supporting various applications such as refrigeration, industrial processes, and ice and snow surfaces.
Chiller options include external Hydronic Modules, controllers, group control programs, and mounting accessories, while fan coil options encompass drainage pumps, removable panels, and supplementary control systems.
The software is divided into control software and software for the calculation and design systems. Separately presented diagnostic software for specialists in service and repair.
• Type: V8 Series VRF
• Cooling Capacity (kW): 25.2-112
• Heating Capacity (kW): 27-123.5
• Net dimensions (WxHxD)(mm): (940x1760x825)-(1880x1760x825)
• Net Weight (kg): 195-428
• Sound pressure level (dB(A)): 40-67
• Refrigerant Type: R410A
• Ambient temp. operation range (Cooling) (°C): -15-55
• Ambient temp. operation range (Heating) (°C): -30-30
• V6R Heat Recovery VRF: Offers simultaneous heating and cooling with maximum efficiency and comfort, providing superior indoor climate control.
• Versatile Compatibility: The system is highly compatible with a wide range of indoor units, allowing for tailored climate control solutions in various interior scenarios.
• Simultaneous Heating & Cooling<br>
• Hot Water Solution
• Cooling Capacity: 22.4kW-56kW
• Heating Capacity: 25kW-63kW
• Compressor Type: DC Inverter
• Fan Motor Type: DC Motor
• Refrigerant Type: R410A
• Cooling Capacity: 22.4kW-56kW
• Heating Capacity: 25kW-63kW
• Compressor Type: DC Inverter
• Fan Motor Type: DC Motor
• Refrigerant Type: R410A
• Net Dimensions (WxHxD)(mm): 1340x1635x825
• Packed Dimensions (WxHxD) (mm): 1805x1405x910
• Net Weight (kg): 300
• Sound pressure level (dB(A)): 65
• Power Supply: 380-415V-3N-50/60Hz
• Connectable Indoor Units (Total Capacity): 50%-200%